JBData Page 1 ---------------------------------------------------------------------- JBData Version 1.0b (c)JBSoft 1994 ³ ÃÄ¿ ÀÂÁÄÙ ÀÄ¿ ÄÄÙ Description 2 Installation 2 Operation 2 Marked Files List 10 Edit Window 11 Link/Paste 12 Help 13 Thanks 14 Get-out 14 Limitations 14 Known Problems 14 Version History 15 Contact 16 Index 17 JBData Page 2 ---------------------------------------------------------------------- Description ----------- JBData is a free application for the enhanced display of database files (either those created by Data or those made by an OPL program). If the data file has fields made up of types other than strings then, after editing, a simple check will be made to check that the field is still acceptable in its original form (the editor only works on text so conversions take place before and after edits). The program allows for extra display modes, sorting of the file, better search utilities and other improvements (but see the section called 'Known Problems'). Installation ------------ 1. Copy JBDATA.APP to any \APP\ directory. 2. From the System screen navigate to the place you wish to install the application on the System screen and press Psion-I. 3. Select the drive on which JBDATA.APP resides. 4. Select JBDATA.APP in the file list. 5. Press Enter. The application will install on the screen at the chosen place. A file list of Data files that are in the \DAT\ directories on all drives will be displayed under the JBData icon in the same way as they are under Data. There is no need to remove Data for JBData to work but, because of the vague similarity of icons, some care should be exercised that the required application is selected before running it. Operation --------- To start the application highlight a file under the JBData icon and press Enter. Alternatively, on any file under the JBData icon, press Tab and navigate to the file you wish to open using the cursor keys and Enter. Once the cursor is on that file, press Enter twice (the first press will show a dialog with the name of the file inserted - the second press will open that file). N.B. There is a possibility that, if there is insufficient memory available to run the application, you may be presented with a blank screen. If this happens just press Psion-Esc. This will take you back to the System screen where you can close down some applications to free some memory. I have intercepted this problem as much as possible but have been unable to eliminate it completely. When the application is running use the following keys to operate it. JBData Page 3 ---------------------------------------------------------------------- Movement -------- Down - moves to the next record. In Page mode, if at the last record, will move to the first record. Up - moves to the previous record. In Page mode, if at the first record, will move to the last record. PgUp - In Line mode shows the previous page of records. PgDn - In Line Mode shows the next page of records. Ctrl-PgUp - Show the first record in the file. Ctrl-PgDn - Show the last record in the file. Left - In Line mode moves the display one field to the left. Right - In Line mode moves the display one field to the right. Home - In Line mode moves the display to the first field. End - In Line mode moves the display to the last field with data. Enter - Either move to next record or toggle the Page/Line mode display (depending how set with Shift-Psion-R). Shift-Enter - Move to previous record (dependant on state of Shift-Psion-R). Esc - One press clears the quick find. Two presses in quick succession will clear the line display back to the frozen fields (if any are defined) and the next field. This is a quick method of resetting the visible fields to a consecutive sequence starting with field one. Tab - In Page mode this will allow the use of the cursor keys for missing lines to be scrolled onto the page using the cursor keys. - In Line mode this key finds the next match for QuickSearch (this option is not available in Page mode). Open File Psion-O --------- This option opens a previously existing file. If the file has been previously opened in JBData, configured, and that configuration saved, then this configuration will be used to setup the display. Any Datafile created by Data, JBData, or an OPL program can be opened. At the moment I know of no datafile that cannot be opened by this application. If you come across one please let me know. Merge File Psion-M ---------- To merge two files into one. Normally this would be used to combine two data files. A selection box is shown in order that you can choose the file to merge with the existing database. It is necessary that the two files to be merged have identical fields types in the same order. It is also possible to merge a text file with a data file. The data file must consist only of fields with strings for this to work. Start off as above. Once the filename has been selected then a further dialog will prompt for the character delimiter to be used as a field terminator. If 'Newline' is chosen then a record will consist either of the number of lines that are the equivalent of the number of fields set when the datafile was created, or until two Newlines are encountered with no data between them. Otherwise, records will consist of either the number of fields originally created, or until a new line JBData Page 4 ---------------------------------------------------------------------- is encountered in the text file (whichever occurs first). If the maximum number of fields comes first then the remaining data will be placed in the next record. New File Psion-N -------- To create a new file use this option. A dialog box is shown to choose the new filename. Once this has been chosen a dialog will prompt for the number of fields to include (the default (and maximum number) is 32). Another dialog will then ask for the type of fields required (the default is String) - all the fields should be correctly entered. The file will then be created and you will end up in the Edit screen as a prompt to input some data. If the directory for the file does not exist, it is automatically created. Save As Psion-A ------- To save the current file with a different name, save selected records, or to save as text, use this option. A dialog box will be displayed to prompt for the new name to use. Once this new name has been input (along with any path that is needed) then another dialog may be shown asking if All records should be saved or the Selected records only. This dialog will only show if a MultiFind or Marked File display is current. Another dialog will then be shown which allows for the data to be saved either as another data file or as text. If the Data option is selected then the data will be saved complete with any setup. If the text option is selected then a delimiter character must be set to distinguish between the fields. This works in a similar way to that of the Data application. The options for the delimiter are: New Line Tab Comma Semicolon Other - specify the character on the Char Code line. Compress File Psion-K ------------- This option compresses the current file, clearing all deleted records from the database. If the file is on a Flash SSD then a dialog is shown to give the opportunity to abort the process (it will use as much again space as the original file on a Flash pack). Sort File Psion-S --------- The current file may be sorted. Any sort will automatically update the file saved on the disk and over-write the original file. A dialog box is shown with a choice of three fields to sort on. If you wish to sort on less than three fields then make the fields the same. The default is to sort on the first three fields. There is also the choice to choose the direction of the sort (either Forwards or Reverse - the reverse sort would put Z before A rather than A before Z. If the file is sorted outside of JBData any setup stored with the file may be lost (JBSort does keep the setup and should be used for large JBData Page 5 ---------------------------------------------------------------------- files as it will have more room for data and therefore is less likely to fail due to lack of memory). The fields used to sort the file are saved with the file on exit. If the file resides on a Flash pack then an option to abort the sort is given as the space used up on the pack will double. N.B. The sort that takes place is always an ASCII sort so numbers will not necessarily appear in the correct order (i.e. 666 will appear before 69). The sort takes no account of the length of the field. Memory Sort Shift-Psion-S ----------- This option will sort the file in memory only - the sorted items are only seen in sorted mode in the Line (or Table) mode. Any alteration to the file (i.e. Delete, Add or Edit a record) will disable the sort and a new sort will have to be made. It works in exactly the same way as the ordinary sort but leaves out the final write to disk. To inhibit the sort use Ctrl-Psion-O. If this is used then a new sort will have to be implemented if required - it does not act as a toggle. N.B. Whilst in the sort display mode most options relating to records are inhibited. This is because a look-up table is used to achieve the sort display and the program is unaware of the actual position of the record highlighted. It is also not possible to quick search in this mode - an ordinary search will actually disable the sort before carrying out the search. The fields used to sort the file are saved on exit. Reset Sort Fields - Shift-Psion-O ----------------- The fields used for sorting the database are saved. It you wish to reset these fields to the first three fields again (the initial option) then use this keypress combination before accessing the Sort procedure. Update Record Psion-U ------------- A record can be edited by using this function - to save the changed data press Tab when the edit is complete. Care should be taken with field types as it would be possible to input a string where a number should be. A check is made when Tab is pressed and, if a field is incorrect, the edit box will remain. Pressing Escape will abort any changes. Delete Record Psion-D ------------- Individual or marked records can be deleted using this option. The record to be deleted should be highlighted in the Line mode or displayed using the Page mode. If this option does not appear to work, press Esc and try again. If this option is accessed in a marked files display then an option to delete all the marked files is given. If 'Y' is selected then another dialog is displayed just to make sure you want to delete these marked records. There is no going back once 'Y' is pressed! JBData Page 6 ---------------------------------------------------------------------- Add Record Psion-E ---------- This option creates a new record. Use Tab to save the new record or Escape to abandon the creation. See Update Record for information concerning field types. Print Record Shift-Psion-P ------------ An individual record can be printed using this option. The Print Setup (Psion-Y) should be accessed first to set up the print option as required. The record will be printed in the form it is displayed on the screen. In Page mode there is the option of printing the Labels as well (via a dialog). Edit Labels Psion-L ----------- The labels as displayed can be added or edited using this option. This procedure uses the same editor as that used for records. To save the changes press Tab - use Escape to abandon this option. The type of field is shown where the labels normally appear - this is just a guide and the information contained in the labels field cannot be saved or copied. Edit Widths/Line Wrap Psion-W --------------------- In Line mode the widths of the individual fields are adjustable using this option. It uses dialog boxes to display up to 5 fields at a time. To move to the next set of fields press N, use P to go to the previous selection. When the changes have been completed, press A. This option will only have any effect on the display in Line mode. The width is displayed in character units but it should be remembered that most of the fonts on the computer are proportional and the numbers shown are just a guide. In Page mode when viewing a record the line wrap can be toggled on and off using this same key combination. In Edit and Update line wrap is automatically switched off. Calculate Widths Psion-I ---------------- This option will look at each record in the file in turn and adjust the display widths of each field accordingly. It will take the record with the longest field as its base for that field. Because this procedure looks at every record, on a large file this can take some time to complete. Reset Widths Shift-Psion-I ------------ Widths are reset to the default size of 20 characters for each field when this option is activated. Please note that with proportional fonts more characters than specified may be shown. Page/Line View Psion-R -------------- To toggle between the Line and Page View use this option. Page View shows one record (or as much as possible) per page, Line View shows several records per page, one per line. It is also possible to switch the Enter key to toggle as well (use Shift-Psion-R). JBData Page 7 ---------------------------------------------------------------------- Record Number Toggle Shift-Psion-N -------------------- This option toggles the record numbers on and off. In Line mode the record number is shown at the start of the line, In Page mode the record number and the total number of records is displayed in the bottom right hand corner. Labels Toggle Psion-H ------------- Labels display can be toggled on and off using this key combination. It is operative in both Line and Page mode but the selected display is independent of the other (e.g. it is possible to have Labels shown in Line mode but not Page mode). Blank Lines Toggle/Grid Lines Psion-B ----------------------------- In Page mode blank lines can be shown or hidden using this option. To detect which method is in use, the Menu will show the opposite option to that in force. In Line mode this command will bring up a dialog box in order that you might select the visibility of grid lines for each record. In certain circumstances it is not easy to follow the individual lines or fields - this option will help. You can select a horizontal line between records and/or a vertical line between fields. The lines are shown in grey so as not to be too obtrusive and also to distinguish between frozen fields and the others. Freeze Fields Shift-Psion-K ------------- In Line mode it is possible to keep some fields always visible. The only option selectable is the end field to freeze - the first visible field will always be field 1. The next visible field is adjustable using the Left and Right cursor keys. If Freeze is selected then the next visible field position is saved in the setup file and the position restored when re-opening the database. The end of the frozen portion is displayed with a vertical black line. Enter Page/Line mode display toggle Shift-Psion-R ----------------------------------- This switch allows the Enter key to toggle between Page and Line mode or to move to the next record. The current mode is saved in the setup and restored when re-opening the database. The current mode can be displayed on the menu under Display. Dialling Psion-Help -------- It is possible to use the program in a similar way to Data and dial telephone numbers whose fields are marked with the telephone symbol. A list of telephone numbers relating to the selected record is shown. Choose one by highlighting it and press Enter (you can edit the data before pressing Enter). Another dialog will show giving the options of Dial, Dial Out or Cancel. If Dial Out is chosen then the method of dialling out is taken from the Dialling setup available from the System screen as are the other parameters used for this option. Should there not be a Dial Out specified then the program will resort to '9,' for the method used. N.B. The key options are intentionally reversed from that of Data as I find the combination I have chosen easier to use! JBData Page 8 ---------------------------------------------------------------------- QuickSearch ----------- There is a quick find which is used by just typing the word you require to find. Normally, this would only be used from the Line view although it is available in the Page view. This always operates on the first visible field (in Freeze either one of the frozen fields or the first moveable field is used). In field one the inputted string will only work from the first letter of the field, in other fields the string to be found can occur anywhere within the field. The search string is cleared by pressing Escape. There is also a timeout which clears the search string after a minute of not searching. The next find using the same string can be shown using Tab (in Line mode only). Numeric fields can be searched in this manner. N.B. When used in the Page view strange results may occur if the first visible field in Line mode is something other than field one as the procedure takes the field set in Line mode for its search even in Page mode. This search field can be displayed using Psion-T. Find Psion-F ---- This is a normal type search and works in the same way as that of other Apps. There are a couple of additional options: 1. Reverse search - this searches from the end of the database rather than the front. 2. Single/Multiple - Single works in the usual way, Multiple will gather all the matches and then display only the found files. It is also possible to narrow the search with logical statements. There are two sorts available - the first sort is self explanatory, the second a little quicker to type. Currently these are: and - && or - ^^ xor - ^& not - -- so to look for a record that has 'David' and 'Road' then input 'david && road' or 'david and road'. If you wish to use the 'and' variation and also wish to search for the word 'and' then enclose it in quotation marks (e.g. "and"). All searches are case insensitive. If nothing is found the display will remain where it was before the search was started. If you wish to use one of the logical search parameters at the start of the search string (e.g. 'not road') then preface the string with a space (i.e. ' not road' - rather than 'not road'). This is also true for the alternative characters (e.g. ' -- road' rather than '-- road'). To search numeric fields with this command (or Find Field) then a logical search parameter must be used. This is because the internal JBData Page 9 ---------------------------------------------------------------------- Psion search routine ignores numeric fields so it is necessary to use the slower routine written by me - to direct to this requires a logical statement. If only one number is required to be found then, assuming that number is 12, use ' and 12' with a space before the 'and'. Of course, this will also find 121 or 112 or any number or string that has 12 in it. Wildcards are not implemented at present - if there is a requirement then this would be very easy to include but would mean that to search within a string would require wildcards before and after the string to search - please let me know and I'll take a poll. N.B. When searching in Single mode and in Page mode, the find will be highlighted on the screen. However - the Labels will almost certainly not be in step with the data. At present there is no way round this but I hope to fix it in the future. Find Field Shift-Psion-F ---------- Searches in the same way as the normal search but allows a specific field only to be searched. If the enhanced logical statements are used then the find works in exactly the same way as that of the normal find (i.e. it does not take into account the field selected). Find Again Psion-G ---------- In Single Find mode this will display the next record that matches the search criteria. Jump to Record Psion-J -------------- To jump to a specific record, if the number of that record is known, use Psion-J. If an illegal number is inputted then the dialog will remain active. Display QuickSearch field Psion-T ------------------------- To quickly find out which field the QuickSearch will look in use this key combination. The search field will display in the bottom right hand corner of the screen for around 2 seconds. The field selected can only be altered in Line mode. Remove records from list Psion-- ------------------------ A record may be removed from a MultiFind list or a marked file list using this key combination. This command does not delete the record, it only hides it from the display. Add record to list Psion-+ / Shift-Up / Shift-Dn ------------------ This command is only active in the main display and allows the marking of records for display as a marked file. The mark is not shown visibly other than in the marked files list. A message will be shown marking a record. The only way of telling whether you are looking at a marked files list or the normal list is, in marked files, the headings are printed in negative (reverse video) mode. This is only true of the Line mode. Page mode currently has no clue as to whether a marked list or normal list is being displayed. JBData Page 10 ---------------------------------------------------------------------- Toggle between marked records and main file Psion-V ------------------------------------------- This command will toggle the display between the marked records list and the main list. Reset marked records Shift-Psion-V -------------------- To reset all marked records to unmarked, use this command. If used within the marked files display, it will change to the normal display. About Shift-Psion-A ----- This option displays a dialog box with version numbers etc. of JBData. Zoom In Psion-Z ------- This will change the font used in the display by incrementing the font number. When it gets to the highest number font it will start again at the first relevant font. Separate fonts are used for the Line and Page/Edit views so altering one will not affect the other. Zoom Out Shift-Psion-Z -------- This will change the font used in the display by decrementing the font number. It is the exact opposite of Zoom In. Print Setup Psion-Y ----------- This option allows the Print setup to be changed in a similar way to other Applications. Delete Setup Psion-Q ------------ To delete the setup of the current database, use this option. The setup referred to is the setup of whether Page or Line mode, if Freeze is implemented, the font used, and other similar options. Save Setup Shift-Psion-Q ---------- This option will force a save of the setup - it is normally saved when exiting the database or application. Status Window Psion-Menu ------------- A status window can be toggled between large, small and off in rotation using the Psion-Menu key combination. This window is similar to that available in the Psion applications. Exit Program Psion-X ------------ This key combination will exit (terminate) the program. This also works in the Edit window. In an emergency you can also use Psion-Esc but this will not save any setup and terminates the program without any warning. To leave without saving any setup use Shift-Psion-X. Edit Window Psion-E/Psion-U ----------- At present it is not possible to alter the number of fields or change their types once they have been set. The obvious way of doing this JBData Page 11 ---------------------------------------------------------------------- (should it be necessary) would be to create a new file and import the data to it. The line wrap is always off in the Edit window. It cannot be switched on. This is to avoid problems with the labels getting out of step with the data. There are a few keys that operate in an edit window at present. These are: Find Psion-F ---- Allows a search to take place in the current record being edited. Find Again Psion-G ---------- Once an item has been found, this allows the search to continue through the record to find the next match. Find and Replace Psion-R ---------------- Allows a search and, if found, then the item can be replaced with a given string. If a find is made then a dialog will appear allowing you to ignore the replacement of this item, replace all the items without a further prompt, or just replace this one and continue the search. Escape from the dialog will terminate this procedure. Copy Psion-C ---- Copies highlighted text to a clipboard. The clipboard is saved between edits so that text can be moved from one item to another. It is also possible to copy data to the clipboard in Page mode. Press Tab and mark accordingly. No cursor is shown so only whole lines can be copied normally. Delete Psion-D ------ Copies highlighted text to a clipboard and then deletes the text in the record. The clipboard is saved between edits but is discarded when the application is closed down. Insert Psion-I ------ Inserts previously copied text from the clipboard to the present cursor position. Bring Psion-B ----- Brings highlighted text from other applications (only if they support this option). Evaluate Psion-V -------- Evaluates a highlighted expression and stores the result in the clipboard. This can be inserted in the record using Psion-I. JBData Page 12 ---------------------------------------------------------------------- Zoom (Shift-)Psion-Z ---- This works in the same way as that of the main window allowing the font size to be changed up and down. See under Zoom In and Zoom Out above. This also affects the font in the Page view. Tab width Psion-T --------- To alter the width between Tabs (which are entered with Shift-Tab) use this command which enables the distance to be specified. Under normal circumstances 4 characters per Tab is usual. The distance previously set is shown in the dialog initially. This data is saved along with the file. Toggle Symbols Shift-Psion-C -------------- This key combination will toggle the viewing of Tabs, Carriage Returns and New Lines within Fields. The state of this toggle is remembered between edits and sessions. Link/Paste ---------- This option is implemented. What this means is that, in an edit mode, highlighted text from other applications that allow Link/Paste (e.g. Word/Data/Agenda) can be brought in to the edit window at the cursor location by using Psion-B. Also, any highlighted text in an edit window can be 'grabbed' by the other applications (normally Psion-B). For this to work successfully, the application which has the information to be grabbed should have been the last one to be used before the application who requires the text. N.B. It is possible to export from the Edit and Page view mode only. The Page view is restricted in its marking in that there is no visible cursor so lines only would normally be marked in this mode. Labels in Edit mode ------------------- If labels have been setup then these will be displayed as in Data. If no labels have been set then the type of field will be displayed in brackets as an aide m‚moire - e.g. (String) or (Integer). Special Keys in Edit -------------------- To end an Edit, press Tab - to leave the edit without changing anything use Escape. If there is data beyond the last field of the record then this data will be lost on Save so, under these circumstances, a dialog box will display requesting confirmation that it is OK to save as it is. 'Return' and Escape will take you back to the Edit. N.B. It is not possible to use Tab or Esc from the Menu, the actions are listed there as an aide m‚moire. First remove the Menu with Esc and then press either Tab or Esc. To toggle the display of Symbols (Enter/Tab etc.) in the Edit mode use Shift-Psion-C. There are a few special characters (or key-presses) in the Edit mode. JBData Page 13 ---------------------------------------------------------------------- Tab character - use Shift-Tab New Line within field - use Shift-Enter Dial symbol - use Shift-Dial Help ---- There is a brief on-line help available using the Help key. It does not cover all options but should assist under normal circumstances. Brief notes of the way JBData Setup works ----------------------------------------- The setup is stored in a record which has the type number 13 (for those that are aware of the way that datafiles operate). This record is always the same length in each file but may vary from version to version of JBData. If the setup is changed then the revised setup is saved when the datafile is closed (either by exiting JBData or by opening a new file). This record is ignored by Data, DataDeLuxe, OPL programs and, hopefully, all other applications (there can be no guarantee of this though). Once the setup has been saved then the datafile will grow slightly in size (around 100 bytes). To make the datafile revert to an ordinary datafile (without this setup record), delete the record using Psion-H and then exit the application using Shift-Psion-X. It should not be necessary to do this for the datafile to work with other applications. Thanks ------ Thanks are especially due to Wolfgang Schirmer (for help above and beyond anything I could have hoped for), Andre Rodach, Andy Clarkson, Nigel Wright and Tom Dolbilin for their help with this project. Without them (and others) it would not be half as good as it is. Thank you very much. Please do not contact any of the above for support, they have no access to the source code and therefore it is unlikely that they will be able to answer any queries. Get-out ------- As is usual with programs of this sort, I shall not be held responsible for any loss of data , however caused, as a result of using this program. The user must take responsibility for his actions and uses the program at his own risk. I reserve all rights of copyright to the program although neither registration nor payment are required to use it. Limitations ----------- Only sorts files with less than 2000 records (the program may not sort this many due to lack of memory though - a text file with data in all three fields may well fail around 1000 records). Only finds up to 999 finds in MultiFind. JBData Page 14 ---------------------------------------------------------------------- Only 999 marked files can be used at any one time. The program needs around 100k of memory to work. Known Problems -------------- There is a known problem with Label displays in the Edit box sometimes getting out of step with the appropriate fields. At the moment, this is impossible to fix without a considerable outlay in money and, as the program doesn't generate any income, it is unlikely to be fixed in the near future. At present the program does not accept remote commands from programs such as Tom Dolbilin's MACRO or KMAC. It is hoped to rectify this in a later version. If the program freezes for any reason then do not play, trying to un- freeze it. This is extremely unlikely to be successful and may cause greater problems in the long run (such as a complete hard reset of the computer - I know because this happened to me!). Instead, escape using Psion-Esc immediately - please let me know if this happens to you and under what circumstances. Version History --------------- Version 1.0 ----------- First Public release. Version 1.0a ------------ Fixed problem with Escape in Save Setup dialog. Fixed problem with QuickSearching and FreezeFields (only allowed on field 1 originally). Fixed problem with Tab being inserted when exiting Edit and Caps Lock was on. Fixed problem with initial display of Marked records if the cursor was at a record greater than the total Marked record list. Fixed problem of inability to switch off Labels in Page mode. Fixed problem with logical search only accepting one logical statement correctly. Added Shift-Psion-X to the menu. Switched window size options for Status Window to more closely resemble Psion Apps. Added Shift-Enter to go back a record (similar to Data). Added cursor saving between Marked and Normal list so that cursor will remain where it was in the list (this does not work at the first display - the cursor always will go to the top of the list initially). QuickSearch string is now cleared after 1 minute of non-use. Busy note added for closing down large files. Added e-mail addresses to About dialog. Version 1.0b ------------ Fixed problem with Label Edit not always showing field type correctly. Fixed problem of Help not working in Edit mode. Fixed Link/Paste outward-bound (broken in 1.0a). JBData Page 15 ---------------------------------------------------------------------- Fixed problem with saving marked records sometimes failing with 'Unable to create ...'. Fixed problem with Ctrl-Shift-Psion-Help causing app to fail - it now does nothing! (it is not easy to implement) Fixed problem of Delete not copying data to Clipboard first (not sure when this was broken - maybe not in a release). Fixed problem of Wrap characters in View Page and Edit working in reverse (now no wrap on Edit - switchable in View). Fixed problem of 'spurious' Cannot compress Flash media messages appearing. Fixed problem of field types not appearing when entering first record of new file. Fixed problem of find sometimes corrupting the screen when nothing found. Fixed problem of altering font in Edit mode causing Line mode spacing to be corrupted. Hopefully fixed problem with occasional panic #82. Changed the method of displaying reversed labels in Marked Files List. Added Mark records with Shift-Up and Shift-Down. Added ability to switch and create files from System Screen (using Enter). Added Search (and Replace) in Edit window. Added Highlight to single search find in Page mode (see appropriate section for getout though). Extended Dial check so that telephone symbol can be embedded in the data. Label display status is now different for Page and Line modes (the selection is independent). Contact ------- John Boyce CompuServe: 100014,1240 CIX/Internet: jboyce@cix.compulink.co.uk JBData Page 16 ---------------------------------------------------------------------- Index ----- About 10 Add Record 6 Add record to list 10 Blank Lines Toggle 7 Bring 12 Calculate Widths 6 Compress File 4 Contact 16 Copy 12 Delete 12 Delete Record 6 Delete Setup 11 Description 2 Dialling 8 Display QuickSearch field 10 Edit Labels 6 Edit Widths 6 Edit Window 11 Enter Key Toggle 7 Enter Page/Line mode display toggle 7 Evaluate 12 Exit Program 11 Find 8, 11 Find Again 9, 11 Find and Replace 11 Find Field 9 Freeze Fields 7 Get-out 14 Grid Lines 7 Help 13 Index 17 Insert 12 Installation 2 JBData Setup 13 Jump to Record 9 Known Problems 14 Labels in Edit mode 13 Labels Toggle 7 Limitations 14 Line Wrap 6 Link/Paste 12 List add record 10 remove record 10 reset 10 toggle 10 JBData Page 17 ---------------------------------------------------------------------- Marked records add records 10 remove record 10 reset to none 10 toggle display 10 Memory Sort 5 Merge File 3 Movement 3 New File 4 Open File 3 Operation 2 Page/Line View 7 Print Record 6 Print Setup 10 QuickSearch 8 Record Number Toggle 7 Remove records from list 10 Reset marked records 10 Reset Sort Fields 5 Reset Widths 7 Save As 4 Save Selected 4 Save Setup 11 Search and Replace 11 Sort memory 5 reset fields 5 Sort File 4 Special Keys in Edit 13 Status Window 11 Support 16 Tab width 12 Thanks 14 Toggle between marked records and main file 10 Toggle Symbols 12 Update Record 5 Version History 15 Zoom 12 Zoom In 10 Zoom Out 10 John Boyce 30 December 1994